Tempest 24v Torch Transformer
Sku# 94800829
Page 3 of 4
17602011 – Printed 2/15/18
© Travis Industries, Inc.
Wiring the Transformer
NOTE: Disconnect power at the service breaker prior to installing the transformer. After
installation, restore power to the transformer and test both the incoming and outgoing
circuits.
Installation should only done by a qualified electrician or installer (consult local codes).
Use suitable connectors when wiring the transformer (silicone-filled wire nuts).
The torches can be “Daisy Chained” together (see “Example A” below) or each torch can
be a “home run” back to the transformer (see “Example B” below).
Example A
Example B
Polarity must be maintained in all multiple torch installations. Failure to maintain polarity
will result in damage to the control module.
