TRAVELLER 1072569, Руководство пользователя, Страница: 6 / 13

1072569
P a g e | 5
The inverter should be connected to your 12V power source with
the two sets of DC cables to four posts (included). We
recommend that the equipment or appliance switch be in the
“OFF” position prior to plugging into the AC receptacle of the
inverter.
Connecting the inverter:
1) Place the inverter on a flat surface, such as on the vehicle
floor.
2) Please make sure that the inverter is off.
3) Attach the ring type connector marked with red to the positive
(+) DC terminal on the power inverter, and attach the ring
connector marked with black to the negative (-) DC terminal.
4) Tighten the nut on each DC terminal until it is snug. DO NOT
over-tighten.
5) Connect the other end of the DC cables to 12V battery, red to
positive and black to negative.
Caution!
Reverse the polarity will arouse blown fuse or damage to the
inverter, which may also void the warranty.
6) Repeat step (3)-(5) to connect another set of DC cables
Notice: As this is a heavy duty unit, it requires two set of cable
connecting to carry the electrical power.
7) Press the ON button to turn inverter on.
8) Plug the AC product(s) you wish to operate into the AC
outlet(s).
9) Switch them on, one at a time.
10) When the power inverter is not in use, disconnect the DC
O-ring from the battery to prevent slight discharge of battery
.