ON-BOARD ELECTRONICS
USING THE ELECTRONICS:
The TB-4P features a Seymour Duncan designed Mustang Bass style MM-101 pickup and Volume and tone
knobs. A standard 1/4” output jack can be used to plug the bass into an amplifier of your choice.
The built-in headphone amp powers headphones from the 1/8” output on the jackplate. To activate the
headphone
amp, plug into the headphone jack. The headphone signal is affected by the Volume and Tone
knobs. Be sure to unplug all cables from your
guitar when not in use to save battery life.
USING THE AUX-IN:
The TB-4P’s electronics allow you to mix an auxiliary signal
with the bass signal and the mixed signal will
come through the headphones and 1/4” outputs. Plug your mobile device into the 1/8” aux-in jack on the
jackplate and adjust the volume on your device to the desired
level.
CHANGING THE BATTERY:
The “BATT LO” indicator will light it’s time to replace the batteries. The battery compartment is located on the
back of the guitar. 2 AAA batteries are required.
travelerguitar.com
AUX-IN
