INSTALLING STRINGS:
The CL-3E is factory equipped with D’Addario EXP-16. If you choose to use a different gauge of strings, a truss
rod adjustment may be necessary.
1. Loosen existing strings.
2. Remove strings from tuning machines by unwrapping them.
3. Remove bridge pins from bridge by using bridge pin puller or other tool.
4. Place new strings ball-end into bridge hole, and replace bridge pin, making sure to seat the ball-end
before tightening the string.
5. Insert string into tuning machine, leaving approximately 2 1/2” of slack so the string can wrap around
the tuning machine post. Bend the string to anchor it in place in order to hold the string after it is fed
through the tuner.
6. Slowly tune to pitch.
7. Cut excess string.
STRINGING AND TUNING
travelerguitar.com
EQ/ TUNER/ AUX-IN/
HEADPHONE AMP
OUTPUT JACK/
STRAP BUTTON
BRIDGE PINS
TUNING MACHINES
