A F T E R U S E C A R E
15
Chapter 5: After Use Care
To keep the Master Controller (MC) operating as designed, the
following preventive maintenance actions must be completed
after each training session.
These easy to perform maintenance actions will help ensure the MC
remains in peak operating condition for each training session:
1.
Remove battery
daily after training is complete. Do not store battery in the
Master Controller as this could cause the batteries to fail.
2.
Fully recharge the battery
after each training exercise. To extend the
service life of the batteries, do not run the batteries until they are completely
out of charge.
3.
Do not use
a partially charged battery as this will cause the MC to not
operate properly.
4.
Only use
approved chargers supplied with your TraumaFX® upper or
lower unit to recharge the batteries.
5.
Read the User’s Manual
for the Battery Chargers and follow
instructions and precautions listed inside the manual.
Chapter
5