background image

Manual setting of network parameters

In order to connect to the IP camera, the PC should be in the same local 
network as the camera. The IP address of the camera, the PC and any 
other device on the network should not match.

IP camera has the following default settings:
  

- IP address: 192.168.1.188

   - Subnet mask: 255.255.0.0
    - Gateway: 192.168.1.1
    - HTTP-port: 80
    - username: admin
    - password: admin

PC network settings example: 

    - IP address: 192.168.1.10;
    - Subnet mask: 255.255.0.0.

There are 3 options to set up your camera:

1. Change IP address of a camera manually.
    Start your browser, connect to IP camera and enter your 
    username and password. Choose appropriate menu item and change 
    network settings of IP camera.

2. Set up camera IP address using fast configuration utility that can be
    downloaded from www.trassir.com.

3. Change IP camera settings using TRASSIR professional software.

You can find detailed camera settings instructions in User Manual that 

can be downloaded from trassir.com.

Introduction

Congratulations on purchasing TR-D9151IR2 IP camera.
Please read User Manual before using a camera.

Key features

 • Support codec H.265
 • Wide Dynamic Range (Real WDR 120dB)
 • IR range up to 25 m
 • Built-in video archive (Edge Storage) – local recording 
   on MicroSD card* up to 128GB
 • Two-way audio (1 in / 1 out, built-in microphone)
 • Alarm: 1 in / 1 out
 • Protocol: TCP/IP, HTTP, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, 

UPnP, SMTP, NTP, RTMP

 • Power supply 12V DC or PoE
 • Lightning protection: TVS 4000V**

___________________________

  * MicroSD Card is not included into camera package

** Device must be grounded

Camera Package

1. IP camera  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
2. User manual  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.
3. Mounting kit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 pc.

Attention!

The power supply should meet the following requirements: output 

voltage, current, polarity, and working temperature. When using the 

camera in thunderstorm conditions, make sure there is a lightning rod or 

unplug the power connector.

Pay attention to the temperature requirements for IP camera operation. 

Avoid using the device in excessively high or low temperatures.

Do not install the camera near heaters. Do not point the camera lens at 

the sun or at bright objects as this can damage the image sensor.

Connecting

To get started with IP camera you are required to have a PC connected to 
the local network with Windows installed and Internet Explorer version 8 
or higher.

1. Connect IP camera to the network.
2. When the camera is connected through a switch which doesn't support
    PoE, connect adapter to power jack.

Dimensions

780-16.4.21

120

∅40

∅96,6

79,7

58

Отзывы: