TRASSIR TR-D4D2, Руководство пользователя

Страница: 116 / 151

CHAPTER 3. TRASSIR IP CAMERA CONFIGURATION
3.3.6.3 «Line crossing» tab
NOTE.
Before the setup, make sure that the camera is installed correctly for the proper operation
of the video analytics module. Check Supplement E. IP Camera placement for camera
installation recommendations.
Open the Crossing Line tab to set up the line crossing detection.
Draw a line on the video using the left mouse button, at the crossing of which the detector
will trigger. The following settings are available for the Line Crossing Detector:
Setting Description
Sensitivity Specify the detector's sensitivity, from 0 to 4 . The higher the value is, the more
sensitive is the detector.
Trigger blink Set the flag so the specified border start flashing on video when the detector is
triggered.
Scene mode Select the detector's operation mode: Indoor or Outdoor .
Direction Set the direction of the specified border crossing at which the alarm event will
be triggered:
 A - > B — left to right;
 B - > A — right to left;
 A < - > B — either way.
Press Save to save the settings.
Press Reset to reset current detections settings.
116 User manual for TRASSIR IP cameras