TRAPP TRF 300, Инструкция по эксплуатации, Страница: 33 / 60

ENGLISH
33
www.trapp.com.br
Attention!
When the shredder is operating, do neither
put your hand inside the green crop feeder
nor in the downward exit. Such action will
cause serious damages to your physical
integrity (Fig. 1).
Attention!
Whenever cleaning or servicing, make
sure the equipment is off and the blades
are still as they continue to move for some
seconds.
Technical Characteristics
Model
Power
(cv)
Voltage
(V)
Rotation (rpm)
Motor
50 Hz 60 Hz
TRF 50
2) 1.5
127 - 3,600
Monophase
220 3,000 3,600
TRF 70
2)
1.5 127/220 3,000 3,600 Monophase
TRF 80
2)
2 127/220 3,000 3,600 Monophase
TRF 80F
2)
2 127/220 3,000 3,600 Monophase
TRF 90
1)
2 127/220 3,000 3,600 Monophase
TRF 300
1)
2 127/220 3,000 3,600 Monophase
2 - 3 220/380 3,000 3,600 Three-phase
TRF 300F 1)
2 127/220 3,000 3,600 Monophase
2 - 3 220/380 3,000 3,600 Three-phase
TRF 400
2)
2 127/220 3,000 3,600 Monophase
2 - 3 220/380
1)
3,000 3,600 Three-phase
TRF 400F
2)
2 127/220 3,000 3,600 Monophase
2 - 3 220/380 1) 3,000 3,600 Three-phase
Environmental conditions limits:
Temperature: 40 ° C
Air relative humidity: 80%
Notes: 1) The machines come out from the factory without switch (on/off) and electric motor connection, being at the
customer’s discretion connecting it in the desired voltage, as available in the region. The motor connection
scheme is made available in the motor itself, so that the customer may proceed with the connection.
2) The machines come with some disassembled components when they leave the factory. Before putting them to work,
see the assembly instructions in this manual.
Note:
TRAPP makes no warranty for the motor being damaged due to reversed or wrong connection, as
described in the manual or for incorrectly assembling the equipment.