Installing an MP—Model MP-241, MP-252, and MP-262
Chapter 3
Installing and Connecting an MP
35
Confidential—Beta Draft—
Confidential—Beta Draft—12 May 04
Figure 22. Step 10—Locking the Bracket
11
To ensure that the MP access point is fully locked onto the bracket, gently pull
down on the access point and attempt to rotate it from side to side.
If the access point comes off the bracket, relock the device onto the bracket as
described in step 10 on page 34.
12
If the MP requires an external antenna, install and connect the antenna. (See
“Connecting an MP to an External Antenna” on page 47.)
13
If the other ends of the Cat 5 cable(s) are not already connected to an MX
switch and the link activated, go to “Connecting an MP to an MX Switch” on
page 48. Otherwise, go to “Verifying MP Health” on page 51.
Junction Box Installation
(For required mounting hardware and tools, see Table 5 on page 22.)
840-9502-0006
L
ock
T-bar
