Page 10 of 33 – S5 Wireless Microphone Installation Guide Rev 1.2
4. Program a transmitter with Bank information via receiver Infra-red
port
Press and hold the “Jog-wheel” for approximately 3 seconds if the receiver is
not in mute to enter the
MAIN MENU
. You will enter the
MAIN MENU
immediately if the receiver is in mute.
Rotate the “Jog Wheel” till
TX SET
is
underlined
and press
to enter
TX
SETTINGS.
With
FREQUENCY
underlined, press the “Jog Wheel”.
Align the transmitter and receiver
infra-red windows with the
transmitter no more than 15 cm from
the receiver. With
SEND
underlined,
press the “Jog Wheel” and wait a few
seconds. All frequencies in the bank selected will be transferred to the
transmitter and its current frequency will be set to match the receiver’s current
frequency. The receiver will return to its main display.
For S5.5 - If the receiver is currently in a
SINGLE
or
USER
frequency, it will
transfer the
USER
bank.
For Japanese units - only fixed banks 1 to 6 are available.
For S5.3 - If the receiver is currently in a
SINGLE
frequency, it will transfer
Bank1.
