S
ERVICE
&
M
AINTENANCE
Operator Manual Rev 1.1
25
Updating your RainbowHD
All software and firmware updates are possible by the sole use of a USB key.
The following procedure sets how to proceed to update your monitor.
Step 1
Get the last software update file for your RainbowHD.
Software and firmware files are merged into a single file. This file can be downloaded on our website
(Support page) or sent by the Transvideo support team or by your local Transvideo representative.
Step 2
Paste the software update file
at the root
of the USB key.
Step 3
Plug in the USB key in the monitor.
Step 4
Switch on the monitor while keeping pressed the joystick knob.
Step 5
The update starts. Do not turn off the monitor neither remove the USB key until the update ends.
Once updated, the monitor automatically starts on and performs a full reset.
It can take several seconds before your monitor reach its normal operation.
You can visit our support section on our website for more information regarding monitor updates
(registered users only).
Precaution
The USB key must be FAT formatted.
Do not rename files on the USB key.
Calibration
The white point of the monitor is individually calibrated in factory for D65 and D56.
The calibration doesn’t need to be performed except after some specific service operation as the
replacement of the backlight unit or if you need to match a large inventory of your RainbowHD after
hundreds hours of use.
To perform the calibration, you need to send the product to the factory. Fees may apply if needed.
Product Return
For repairs and technical operation you may return the product to the factory. Please use the
following procedure:
➀
Ask for a RAN (Return Authorization Number)
Log in to our website using your user account
and visit the Support section
www.transvideo.eu/support
Or contact us by:
Email
Fax
+33 2 3260 1479
Tel
+33 2 3232 2761
Содержание RainbowHD
Страница 1: ...Rev 1 1 January 2014 751TS0035 RainbowHD Operator Manual ...
Страница 31: ...NOTES Operator Manual Rev 1 1 31 ...
