5
Barge In (Override)
Description:
Barge In allows you to enter an existing conversation.
Depending on system programming, you may barge
in on a station or a CO line.
1. Lift Handset.
2. Dial a station number or directly access an outside line by dialing
[8], [0], plus the line number (1-8). You receive busy tone.
3. Press [0]. If you are allowed, the station or CO line and the other
party in the conversation will hear an intrusion tone of
approximately one second. You will then be added to the
conversation. You will remain in the conversation until you either
hang up or the other parties hang up.
Note: Barge In class is assigned during system programming.
Depending on how your system is programmed, you may
have the ability to override all stations, some stations or no
stations. In any instance where barge in is disallowed, you
will continue to receive busy tone after you dial [0].
Call Doorphone
Description:
Single Line Telephone stations may call the system
doorphone(s).
1. Lift Handset.
2. Dial Extension number of the doorphone
3. If the Doorphone that you called is idle, you will be connected. If
someone else is talking to the doorphone, you will receive a busy
signal.
Note: Callback queuing CANNOT be used in conjunction with
the doorphone.
If the Doorphone has an associated door strike relay, you
may release the door strike by dialing [0]. This will activate
the door strike relay for approximately 1 second. You may
repeat this operation as many times as necessary while you
are connected to the door phone.
