Transphorm TDTTP3300-RD Скачать руководство пользователя

Страница: 3 / 4

3 |

transphormusa.com

| 4

Step 3: Power-down the Board

Switch off the high-voltage AC power input

Step 2: Power-up the Board

Connect an electronic/resistive load to the corresponding marking (CN2).

The requirements for the resistive load are:

• At 115V

input: 150W to ≤1250W

• At 230V

input: 350W to ≤3300W

With the high-voltage power off, connect the high-voltage AC power input to the

corresponding marking (CN1) on the PCB; N and L (PE: potential ground)

Turn on the AC power input (85V

to 265V

, 50Hz to 60Hz); minimum power

load for turn-on sequence is 150W

Monitor CN2 output voltage with V

meter to verify that 385V ±5V is generated

Load can be increased when AC supply is on and board is functional

Note:

See page 5 for important operating guidelines

Содержание TDTTP3300-RD

Страница 1: ...nce Design Quick Start Guide TDTTP3000 RD_0 1 2018 Transphorm Inc All rights reserved 1 805 456 1300 transphormusa com TDTTP3300 RD For evaluation purposes only Design files and more at transphormusa...

Страница 2: ...iance There are areas of this reference board that have exposed access to hazardous high voltage levels Exercise caution to avoid contact with those voltages Also note that the reference board may ret...

Страница 3: ...W At 230VAC input 350W to 3300W g With the high voltage power off connect the high voltage AC power input to the corresponding marking CN1 on the PCB N and L PE potential ground g Turn on the AC power...

Страница 4: ...d to product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards Additionally the reference board does not include all pr...