RADIO OPERATION
1. Slide the FUNCTION switch to the RADIO position,
.
2. Select the desired band with the BAND switch.
5. Adjust the volume level to a comfortable listening level.
6. To turn off the radio, slide the FUNCTION switch to the OFF position.
the POWER Indicator will light up
4. The built-in AM antenna and external FM TELESCOPIC ANTENNA are directional.
When external headphones/earphones are connected, the sound to the unit's main speakers will be muted.
NOTES:
NOTE:
TO PLAY THE RADIO
STEREO HEADPHONE JACK
A stereo headphone jack has been provided on the top of the unit so that you can listen to the unit without disturbing others. To use this
jack, plug in the headphones/earphones (not included) and adjust the VOLUME control to a comfortable listening level.
3. Tune to the desired station by rotating the TUNING control (Move the control back and forth until you get the strongest clearest
sound).
When receiving an FM broadcast, fully extend the TELESCOPIC ANTENNA and position for the best reception.
For AM broadcasts, rotate the whole set until the best reception is heard.
If a particular FM (STEREO) station is weak, or you hear too much background noise, try moving the position of the band
selector switch to the FM (MONO) position. This can often result in a much clearer reception.
When the band selector switch is set to FM STEREO and a stereo broadcast is being received, the FM STEREO indicator
on the top of the unit will be lit.
=
=
=
=
11
