Transonic TC-BS1499, Инструкция по эксплуатации

Страница: 8 / 17

INSTALLATION & BASIC CONNECTION
7
PROGRAM UP BUTTON
Press the button to select the next higher program number.
VOLUME UP BUTTON
Press the button to increase the sound volume level.
MENU BUTTON
Press the button to select PICTURE, SOUND, TIMER, SETUP or SEARCH menu. If submenu
is selected, press the button to exit the submenu.
EFFECT BUTTON
Not use in this model.
SLEEP BUTTON
To press the button, it can preset the unit with definite time (0 ~ 120minutes) in steps of 10
minutes. After that the unit can be automatically switched to standby mode.
AUTOMATIC DEGAUSSING
All colour television receivers are sensitive to magnetic influences, usually caused by
either moving the receiver from one place to another or using certain electrical
appliances near the receiver. This residual magnetism as it is called, sometimes
causes distortion which gives rise to “blotchy” areas of colour in the picture. To avoid
these effects the receiver incorporates an automatic degaussing circuit, which
operates for a short while each time the receiver is switched on using the main switch.
This circuit removes any residual magnetism in the metal parts of the picture tube and
therefore ensures that each time the receiver is switched “ON” using the main switch,
the purity of the colours displayed on the screen remain true and lifelike. If the televi-
sion is moved or faced in different direction, the main switch must be switched off for
at least one hour in order that the automatic degaussing circuit operates properly.
ANTENNA CONNECTION
To connect the 75 OHM coaxial cable from the antenna to the RF socket on the rear
panel, as shown above.
For better reception, especially in outlying areas or where ghosting or
interference occurs, an external roof- mounted antenna is recommended.
For UHF channel reception, use the specified UHF antenna.
14.
15.
16.
17.
18.
1.
2.
●
●