background image

learn mode

: Stop Button

OK

+

OK SET

: Learning Button

Before power connection, be sure that bracket and the TV installed correctly. 
Keep the children away from power.

!

IN 

Press and release. 

(The TV wall mount will automatically 

return to rest against the wall)

left swivel 

Press and release. 

(The TV wall mount will swivel to the left until 

OK

 is 

pressed or the TV wall mount swing to -30° to stop)

NOTE:

 Using this button is valid only when the 

wall mount fully unfolds.

right swivel 

Press and release. 

(The TV wall mount will swivel to the right until 

OK

 is 

pressed or the TV wall mount swing to 30° to stop) 

NOTE:

 Using this button is valid only when the wall 

mount fully unfolds.

memory 1

Press and hold for 5 seconds. 

(The buzzer will sound twice, LED light turn on for 1 

second, The memory is saved as location 1)

memory 2

Press and hold for 5 seconds. 

(The buzzer will sound twice, LED light turn on for 1 

second, The memory is saved as location 2)

location  1   

Press and release, than press 

OK

.

(The TV wall mount will automatically swivel 

to the location 1 after buzzer sounds once)

location 2   

Press and release, than press 

OK

.

(The TV wall mount will automatically swivel to the 

location 2 after buzzer sounds once)

learn mode

OUT

 

Press and release. 

(The TV wall mount will fully unfold)

Remote control operation instruction

1. When powered, the buzzer sounds once beep. TV wall mount will be in standby state.

2. Press 

OK

 to return the TV wall mount flat against the wall and hear one beep from the buzzer, the system will then enter a 

 

  working condition.

3. Follow the key function instructions above to operate.

NOTE:

 

•  If TV wall mount encounters an obstacle or has some damage of machinery part in the process. TV wall mount will stop automati 

  cally and sound three times.

•  When the wall mount meets with an obstacle in the process. Please remove the obstacle and push the wall mount by hand until  

  returns it flat against the wall. The wall mount can normal use after press 

IN

.

LEARN MODE operation instructions

The loss of matched remote control would result in TV wall mount being unusable. The learn mode is used to learn how to use TV 

remote (Only suitable for the TV remote of popular brands.) to control TV wall mount. 

NOTE:

•  TV remote can`t replace the all functions of matched remote control. Only learning the 5 buttons functions.  

 

LEFT SWIVEL

RIGHT SWIVEL

OK

IN

 and 

OUT

•  The user must follow the rules below when using the TV remote to control TV wall mount.

•  Select the alternate buttons from the TV remote, and the button that can`t direct control the TV.

LEARN MODE instructions as shown below

1. Press and hold 

SET

 for 5 seconds until LED light on the matched remote control stays on, than press 

OK

. The buzzer will sound  

  once, the red LED light on the IR receiver will stay on, then the learn mode will be entered.

2. If learn 

LEFT SWIVEL, 

please press 

LEFT SWIVEL

 on the matched remote control until the buzzer sounds twice. The red LED  

  light on the IR receiver will change from being steady to a slow flash.

3. Aim the TV remote at the IR receiver, and press the button on the TV remote that you need to set as the function of  

 

LEFT SWIVEL

 until the buzzer sounds three times. The red LED light on the IR receiver will change from slow flash to a fast  

  flash

4. Press 

OK

 on the matched remote control until the buzzer sounds four times. The red LED light on the IR receiver will turn off.  

 

LEFT SWIVEL 

button will be learned successfully. If the buzzer only sounds once, then a learn failure. (The TV remote won`t  

  support the learning function).

(Please follow step 1 through step 4 in turn if the user need to LEARN more buttons)

Learn „Power“ button on the TV remote:

Press and hold 

SET

 for 5 seconds until LED light on the matched remote control stays on, and then press 

OK

. The buzzer will 

sound once, the red LED light on the IR receiver will stay on, then press and hold 

LOCATION 1

 button on the matched remote 

control until the buzzer sounds twice, then release the 

LOCATION 1

 button. The red LED light on the IR receiver will change from 

being steady to a slow flash. Aim the TV remote at the IR receiver, and press 

Power

 button. The buzzer will sound three times. The 

red LED light on the IR receiver will change from slow flash to a fast flash. Press 

OK

 Button on the matched remote control until 

the buzzer sounds four times. The red LED light on the IR receiver will turn off. 

Power

 button will be Learned successfully. If press 

power

 button, the TV wall mount will automatically reset. 

NOTE:

 When there is no activity for over 20 seconds in any step, TV remote will automatically exit from the learn mode.

Отзывы: