(Fig.3)
Connect the „F“ male connector of the coaxial cable to the „F“ female connector of the antenna, and wear the water-proof
cap to the end of the connected „F“ connector.
Installation 1: Powered by dtV set-top-box (Fig. 4)
Please be noticed that, in this installation, you need to make sure
that your set-top-box can support coaxial cable 5V DC powering via
the IEC or F connector to antenna.
Step 1.
Connect the coaxial cable with antenna and
DTV set-top-box.
Step 2.
Connect the DTV set-top-box to your TV. Please make sure
the coaxial cable powering function of your STB is ON. (Please
check the operational manual of your STB for coaxial cable powering
function).
Step 3:
Check the LED on the antenna. If the LED is not lighted on,
please repeat
Step 2.
Step 4.
Adjust the antenna in the best position for a clear TV picture,
then fix the antenna.
Step 5.
Organize the coaxial cable for neat, tidy and safety.
Installation 2: Powered by Ac/dc-Adaptor (Fig. 5)
Step 1.
Connect the coaxial cable with the antenna and the power
insert (the side with „antenna“ text mark).
Step 2.
Connect the other side of power insert to DTV set-top-box.
Step 3.
Connect the DTV set-top-box to your TV.
Step 4.
Connect the power adapter DC output jack to the DC input
connector of the power insert, and then plug the AC/DC power
adapter into the AC power socket.
Step 5.
Check the LED on the antenna. If the LED is not lighted on,
please repeat
Step 4.
Schritt 6:
Adjust the antenna in the best position for a clear
TV picture, then fix the antenna.
Schritt 7:
Organize the coaxial cable for neat, tidy and safety.
Adjusting the reception :
After the antenna mounting and the connection to the receiver is finished, please move the antenna to the position of the best
reception and fix it. Please take reference of the following 2 different positioning ways to adjust the antenna position.
(Fig.6)
Turn the fixing screw A to adjust the antenna position in vertical direction.
(Fig.7)
Turn the fixing screw B to adjust the antenna position left or right in horizontal direction.
Installation 1: Powered by DTV set-top-box (Fig.6)
Please be noticed, in this installation, you need to make sure that your set-top-
box can
support coaxial cable 5V DC powering via the IEC or F connector to antenna.
Step1.
Connect the coaxial cable with antenna and DTV set-top-box
Step2.
Connect the DTV set-top-box to your TV. Please make sure the coaxial
cable
powering function of your STB is ON. (Please check The operational
manual of your STB for coaxial cable powering function)
Step4.
Adjust the antenna in the best position that can get clear TV picture,
then fix the antenna
Step5.
Organize the Coaxial Cable for neat, tidy and safety.
Step3.
Check the LED on the antenna. If the LED is not lighted on, pleace go
back to
Step2
.
Step1.
Connect the coaxial cable with antenna and the power insert (the side
with “antenna” text mark).
Setp2.
Connect the other side of power insert to DTV set-top-box.
Step3.
Connect the DTV set-top-box to your TV
Step4.
Connect the power adapter DC output jack to the DC input connector
of the
Power insert, and then plug the AC/DC power adapter into the AC power
socket.
Step6.
Adjust the antenna in the best position that can get clear TV picture,
then fix the antenna
Step6.
Organize the Coaxial Cable for neat, tidy and safety.
Step5.
Check the LED on the antenna. If the LED is not lighted on, pleace go
back to
Step4
.
Installation 2: Powered by AC/DC Adaptor (Fig.7)
5V 40mA
(Fig.6)
(Fig.7)
Fig.3
(Fig.3)
connect the “F” male connector of the coaxial cable to the “F” female connector of the antenna, and wear the water-proof
cap to the end of the connected “F” connector.
Fig.4
Fig.5
Note: After the antenna mounting is finished, please move the antenna to a best reception position and then fix it.
Please take reference of following 2 different positioning way to adjust the antenna position.
(Fig.4)
through the fixing screw A to adjust the antenna position in vertical direction
(Fig.5)
through the fixing screw B to adjust the antenna position left or right in horizontal direction
Fixing screw A
Fixing screw B
Installation 1: Powered by DTV set-top-box (Fig.6)
Please be noticed, in this installation, you need to make sure that your set-top-
box can
support coaxial cable 5V DC powering via the IEC or F connector to antenna.
Step1.
Connect the coaxial cable with antenna and DTV set-top-box
Step2.
Connect the DTV set-top-box to your TV. Please make sure the coaxial
cable
powering function of your STB is ON. (Please check The operational
manual of your STB for coaxial cable powering function)
Step4.
Adjust the antenna in the best position that can get clear TV picture,
then fix the antenna
Step5.
Organize the Coaxial Cable for neat, tidy and safety.
Step3.
Check the LED on the antenna. If the LED is not lighted on, pleace go
back to
Step2
.
Step1.
Connect the coaxial cable with antenna and the power insert (the side
with “antenna” text mark).
Setp2.
Connect the other side of power insert to DTV set-top-box.
Step3.
Connect the DTV set-top-box to your TV
Step4.
Connect the power adapter DC output jack to the DC input connector
of the
Power insert, and then plug the AC/DC power adapter into the AC power
socket.
Step6.
Adjust the antenna in the best position that can get clear TV picture,
then fix the antenna
Step6.
Organize the Coaxial Cable for neat, tidy and safety.
Step5.
Check the LED on the antenna. If the LED is not lighted on, pleace go
back to
Step4
.
Installation 2: Powered by AC/DC Adaptor (Fig.7)
5V 40mA
(Fig.6)
(Fig.7)
Fig.3
(Fig.3)
connect the “F” male connector of the coaxial cable to the “F” female connector of the antenna, and wear the water-proof
cap to the end of the connected “F” connector.
Fig.4
Fig.5
Note: After the antenna mounting is finished, please move the antenna to a best reception position and then fix it.
Please take reference of following 2 different positioning way to adjust the antenna position.
(Fig.4)
through the fixing screw A to adjust the antenna position in vertical direction
(Fig.5)
through the fixing screw B to adjust the antenna position left or right in horizontal direction
Fixing screw A
Fixing screw B
Installation 1: Powered by DTV set-top-box (Fig.6)
Please be noticed, in this installation, you need to make sure that your set-top-
box can
support coaxial cable 5V DC powering via the IEC or F connector to antenna.
Step1.
Connect the coaxial cable with antenna and DTV set-top-box
Step2.
Connect the DTV set-top-box to your TV. Please make sure the coaxial
cable
powering function of your STB is ON. (Please check The operational
manual of your STB for coaxial cable powering function)
Step4.
Adjust the antenna in the best position that can get clear TV picture,
then fix the antenna
Step5.
Organize the Coaxial Cable for neat, tidy and safety.
Step3.
Check the LED on the antenna. If the LED is not lighted on, pleace go
back to
Step2
.
Step1.
Connect the coaxial cable with antenna and the power insert (the side
with “antenna” text mark).
Setp2.
Connect the other side of power insert to DTV set-top-box.
Step3.
Connect the DTV set-top-box to your TV
Step4.
Connect the power adapter DC output jack to the DC input connector
of the
Power insert, and then plug the AC/DC power adapter into the AC power
socket.
Step6.
Adjust the antenna in the best position that can get clear TV picture,
then fix the antenna
Step6.
Organize the Coaxial Cable for neat, tidy and safety.
Step5.
Check the LED on the antenna. If the LED is not lighted on, pleace go
back to
Step4
.
Installation 2: Powered by AC/DC Adaptor (Fig.7)
5V 40mA
(Fig.6)
(Fig.7)
Fig.3
(Fig.3)
connect the “F” male connector of the coaxial cable to the “F” female connector of the antenna, and wear the water-proof
cap to the end of the connected “F” connector.
Fig.4
Fig.5
Note: After the antenna mounting is finished, please move the antenna to a best reception position and then fix it.
Please take reference of following 2 different positioning way to adjust the antenna position.
(Fig.4)
through the fixing screw A to adjust the antenna position in vertical direction
(Fig.5)
through the fixing screw B to adjust the antenna position left or right in horizontal direction
Fixing screw A
Fixing screw B
Fig.3
Fig.6
Fig.7
Fig.4
Fig.5
Fixing screw A
Fixing screw B
