background image

5. Safety instruction

1.  Please separate the product before any operation from  

 

 stream. 

2.  Verify that the wall or the support to which the device will 

  be fixed is strong enough to endure its weight.

3.  Always connect the device to a proper socket. 

  Please refer to the technical data for more details.

4.  The product is exclusively for indoor use, therefor it dosen´t    

  protect against any contact with water or steam.

5.  Please note when installing:

  • It is not exposed directly to the sunlight, since an excessive heating   
    could be detrimental to its normal operation.
  • It is not close to any direct source of heat like heaters, fireplaces or   
    similar equipment. (please refer to the operating temperature for 
    more information)
  • It is at a proper distance from other electrical equipment to avoid    
    possible electrical interference.
  • There is adequate ventilation to guarantee the correct exhaust of the  
    heat during the normal operation. No ignitable material is on or close  
    to the product to avoid the danger of fire.
  • Any direct or indirect contact with any kind of liquid substances is    
    prohibited to prevent short circuit, discharge or electrical leakage.

 7

FMULTI5_Manual-en_99.indd   7

08.11.2013   12:02:18

Содержание F MULTI 15












Отзывы: