P a g e
|
10
2.6
WIRE’S CONNECTION
The grounding wire conductive screw is located at the right end of rear panel, and the power
switch, fuse, power supply socket is just besides, whose order goes like this, power switch is on
the left, power supply socket is on the right and the fuse is just between them.
➢
Connecting Power Cord
➢
User can insert one end into power supply socket, while insert the other end to
AC power.
➢
Connecting Grounding Wire
➢
When the device solely connects to protective ground, it should adopt
independent way, say, share the same ground with other devices. When the
device adopts united way, the grounding resistance should be smaller than 1Ω.
Caution:
Before connecting power cord to TL-9296S Multi-Channel Encoder, user should set the
power switch to “OFF”.
2.7
SIGNAL CABLE CONNECTION
The signal connections include the connection of input signal cable and the connection of output
signal cable. The details are as follows
:
2.7.1
HDMI INPUT CABLE ILLUSTRATION
