Transition Networks SSDTF10 Series Скачать руководство пользователя страница 1

12 

TRANSITION Networks SSDTF10xx-105 series media converters, encode and
decode T1 or E1 twisted-pair copper signals over duplex fiber-optic cable to extend
the distance and transmission reliability of high speed T1 or E1 data traffic.  The
media converters are framing independent (as ESF vs. D4) and support all common
line codes (as AMI, B8ZS, HDB3).

T1/E1 Twisted-Pair Copper 

to 

Fiber

Media Converters

SSDTF10xx-105

USER’S GUIDE

SSDTF1011-105 

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and a set
of RX/TX 

ST

connectors to 

850 nm

multimode

duplex fiber-optic cable. 

SSDTF1012-105 

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

ST

connector to 

1300 nm

singlemode

duplex fiber-optic cable. 

SSDTF1013-105 

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

SC

connector to 

850 nm

multimode

duplex fiber-optic cable. 

SSDTF1014-105 

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

SC-SM

connector to 

1300 nm

singlemode

duplex fiber-optic cable. 

SSDTF1015-105

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

SC-LH

connector to 

1300 nm

singlemode

duplex fiber-optic cable. 

SSDTF1016-105

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

SC

connector to 

1300 nm

singlemode

duplex fiber-optic cable. 

SSDTF1017-105

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

SC

connector to 

1550 nm

singlemode

duplex fiber-optic cable. 

SSDTF1018-105

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

MT-RJ

connector to 

1300 nm

multimode

duplex fiber-optic cable. 

SSDTF1022-105

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and a set
of RX/TX 

ST

connectors to 

1300 nm

singlemode

duplex fiber-optic cable. 

SSDTF1025-105

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

MT-RJ

connector to 

1300 nm

singlemode

duplex fiber-optic cable. 

SSDTF1027-105

Provides an RJ-45 twisted-pair copper
connector for T1 or E1 signals and an
RX/TX 

ST

connector to 

1300 nm

multimode

duplex fiber-optic cable. 

SSDTF10xx-105 in the Network  . . . .2
Installation  . . . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . . . .7
Fault Isolation and Correction  . . . . .8
Cable Specifications  . . . . . . . . . . . . .9
Technical Specifications  . . . . . . . . .11
Compliance Information . . . . . . . . .12

COMPLIANCE INFORMATION

UL Listed 
C-UL Listed (Canada)
CISPR22/EN55022 Class A + EN55204
CE Mark

FCC Regulations

This equipment has been tested and found to comply with the limits for a class A digital
device, pursuant to part 15 of the FCC rules.  These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.  This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.  Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at the user's own expense.

Canadian Regulations

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus
set out on the radio interference regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la class A prescrites dans le Règlement sur le
brouillage radioélectrique édicté par le ministère des Communications du Canada.

European Regulations

Warning

This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

Achtung !

Dieses ist ein Gerät der Funkstörgrenzwertklasse A. In Wohnbereichen können bei Betrieb
dieses Gerätes Rundfunkstörungen auftreten, in weichen Fällen der Benutzer für
entsprechende Gegenmaßnahmen werantwortlich ist.

Attention !

Ceci est un produit de Classe A. Dans un environment domestique, ce produit risque de créer
des interférences radioélectriques, il appartiendra alors à l'utilsateur de prende les measures
spécifiques appropriées.

Trademark Notice

All registered trademarks and trademarks are the property of their respective owners.

Copyright Restrictions

© 2003 TRANSITION Networks.
All rights reserved.  No part of this work may be reproduced or used in any form or by any
means - graphic, electronic, or mechanical - without written permission from TRANSITION
Networks.
Printed in the U.S.A.

33246.B

CAUTION:  RJ connectors are NOT INTENDED FOR CONNECTION TO THE
PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in
damage to the public telephone network.

Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-
Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der
Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über
Telekommunikationsendeinrichtungen einschliesslich der gegenseitigen Anerkennung ihrer
Konformität. 

Отзывы: