Transition Networks SGFEB1040-140, Руководство пользователя

Страница: 2 / 9

2
SGFEBxx40-1xx
24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Installation
CAUTION: Wear a grounding device and observe electrostatic discharge precautions
when handling the media converter. Failure to observe this caution could result in
damage to, and subsequent failure of, the media converter slide-in-module.
Six-position switch 140 and 180 models
The 140/180 six-position switch is located on the circuit board of the media
converter. Use a small, flat-blade screwdriver
(or a similar device) to set the
switches according to the site requirements (see the drawing below for the 140) .
TP S pee d : UP = 100 Mb s , DOW N = 10 Mb s (Note 1)
TP Au t o- N e g o t ia t ion: UP = Enable d , DOW N = Di s able d
TP Duplex: UP = Full, DOW N = Hal f (Note 1)
Po rt 2/3 Re d un d ancy UP = Di s able d , DOW N = Enable d
Reve rt wi t h S W4 d own: UP = Di s able d , DOW N = Enable d
S W Po s i t ion Up
Model 140
S W Po s i t ion Down
P2/P3 Blockin g UP = Di s able d , DOW N = Enable
1 2 3 4 5 6
1. Twisted-Pair Auto-Negotiation
UP Enable Auto-Negotiation for the copper connection.
DOWN Disable Auto-Negotiation for the copper connection.
2. Twisted-Pair Speed 10Mbs/100Mbs (See Note 1)
UP Set copper connection speed to 100Mbs.
DOWN Set copper connection speed to 10Mbs.
3. Twisted-Pair Full/Half Duplex (See Note 1)
UP Operate in full-duplex mode.
DOWN Operate in half-duplex mode of the attached device.
4. Redundancy (Ports 2 and 3)
UP Disabled
DOWN Enabled
5. Primary/Secondary revert with SW4 DOWN
UP Disabled (continues to use the secondary port after primary port has
been restored) recommended setting
DOWN Enabled (reverts to the primary port after it has been restored)
6. Port 2 to Port 3 Blocking
UP Disabled
Down
Enabled
Note 1: Only use when Auto-Negotiation is disabled.
SGFEBxx40-1xx
techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.
3
Installation—continued
Po rt 1 Duplex: UP = Full, DOW N = Hal f (note 3)
Po rt 1 S pee d : UP = 1000 Mb s , DOW N = 100 Mb s (note 2)
Po rt 1 Mo d e: UP = 100/1000Ba s e-X, DOW N = SG MII
Po rts 2/3 Re d un d ancy: UP = Di s able d , DOW N = Enable d
S W Po s i t ion Up
Model 180
S W Po s i t ion Down
1 2 3 4 5 6
Reve rt wi t h S W4 d own : UP = Di s able d , DOW N = Enable d
P2/P3 Blockin g UP = Di s able d , DOW N = Enable
Note 2: Only use if in 100/1000Base-X mode, SW3 UP.
Note 3: Only use if in 100/1000Base-X mode and in 100 Mbs mode, SW3 UP;
SW1 DOWN
1. Speed (Port 1) (See Note 2)
UP 1000 Mbs
DOWN 100 Mbs
2. Duplex (Port 1) (See Note 3)
UP Full
DOWN Half
3. Mode (Port 1)
UP 100/1000Base-X.
DOWN SGMII
( Port 1 copper. model 140 only)
4. Redundancy (Ports 2 and 3)
UP Disabled
DOWN Enabled
5. Primary/Secondary revert with SW4 DOWN
UP Disabled (continues to use the secondary port after primary port has
been restored) recommended setting
DOWN Enabled (reverts to the primary port after it has been restored)
6. Port 2 to Port 3 Blocking
UP Disabled
Down
Enabled