12
SGFEB10xx-12x
24-Hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600
Cable Specification—continued
Fiber cable—continued
SGFEB1029-126
1510nm TX/1590nm RX single mode
SGFEB1029-127
1590nm TX/1510nm RX single mode
Fiber Optic Transmitter Power:
min: -2.0 dBm
max: -3.0 dBm
Fiber Optic Receiver Sensitivity:
min: -26.0 dBm
max: -3.0 dBm
Link Budget:
24.0 dB
SGFEB1035-120
1550nm single mode
Fiber-optic Transmitter Power:
min: 0.0 dBm
max: +5.0 dBm
Fiber-optic Receiver Sensitivity:
min: -27.0 dBm
max: -3.0 dBm
Link Budget:
27.0 dB
The fiber optic transmitters on this device meet Class I Laser safety
requirements per IEC-825/CDRH standards and comply with 21 CFR1040.10
and 21CFR1040.11.
Copper cable
Category 5
(minimum requirement)
Gauge:
24 to 22 AWG
Attenuation:
22.0 dB /100 m @ 100 MHz
Maximum Cable Distance:
100 meters
• Straight-through OR crossover twisted-pair cable may be used.
• Shielded (STP) OR unshielded twisted-pair (UTP) cable may be used.
• All pin pairs
(1&2, 3&6, 4&5, 7&8)
are active pins in a Gigabit Ethernet network.
• Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
•
Do not use flat or silver satin wire.
Straight-Through Cable
Crossover Cable
Twisted Pair #1
Twisted Pair #2
Twisted Pair #2
Twisted Pair #1
13
[email protected] -- Click the “Transition Now” link for a live Web chat.
SGFEB10xx-12x
Technical Specifications
For use with Transition Networks Model SGFEB10xx-12x.
Standards:
IEEE 802.3, IEEE 802.3ab,IEEE 802.3u,
IEEE 802.3z
Dimensions:
3.25 x 1 x 4.8 in
(82 x 25 x 122 mm)
Weight:
2.0 lbs
(0.9 kg)
Wall Mount Power Supply:
External AC/DC 12V DC, 1.25 A, unregulated
Power Consumption:
4.8 watts
Data Rate
(copper)
:
10/100/1000 Mbps
Data Rate
(fiber)
:
1000 Mbps
(operates in full-duplex only)
Filtering Addresses:
8K MAC addresses
Maximum Frame Size:
1628 bytes tagged
(IEEE 802.3ac)
1632 bytes untagged
MTBF:
48,988 hours
(MIL217F2V5.0) (MIL-HDBK-217F)
122,983 hours
(Bellcore7 V5.0)
Environment:
Tmra*: 0°C to 50°C
(32°F to 122°F)
Storage Temp:
-40°C to 85°C
(-40°F to 185°F)
Humidity:
5% to 95%, non-condensing
Altitude:
0 to 10,000 feet
Warranty:
Lifetime
* Manufacturer’s rated ambient temperature: Tmra range for the SGFEB10xx-12x
depends on the Transition Networks PointSystem™ chassis in which this slide-in-
module will be installed.
WARNING: Visible and invisible laser radiation when open. Do not stare into the beam
or view the beam directly with optical instruments. Failure to observe this warning could
result in an eye injury or blindness.
WARNING: Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422,
RS485, DS1, DS3, Video Coax, etc., are intended to be connected to intra-building
(inside plant)
link segments that are not subject to lightening transients or power faults.
Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422,
RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter-building
(outside
plant)
link segments that are subject to lightening transients or power faults.
