6
S4TEF10xx-10x
15
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
[email protected] -- Click the “Transition Now” link for a live Web chat.
Installation — Continued
Switch Set #2 - Serial Options
6 - not used
7 - not used
8 - not used
9 - not used
switches 6, 7, 8, & 9 are not in use
9
8
7
6
10 - Fiber Loop-Back
Up - Disabled fiber loop-back.
Down - Enabled fiber loop-back.
The loop-back setting is used for installation and
network debugging procedures. When the fiber
loop-back function is enabled, the fiber port
loops all T1/E1 signals from the receive ports
back to the transmit ports. The loop-back test
scenarios are described in detail in the
Troubleshooting section.
up
down
Disables Loop-Back
Enables Loop-Back
10
Technical Specifications
For use with Transition Networks Model S4TEF10xx-10x or equivalent.
Standards
G.703, AMI/B8Zs/HDB3
Data Rate
Fiber: 100 Mb/s
Dimensions
3.7" x 4.7" x 1.8"
(93 mm x 120 mm x 47 mm)
Weight
2 lb.
(0.90 kg)
approximately
Power Consumption
6.0 watts
Power Supply
12 VDC, 0.8 Amp
(North. Am., EU, Latin Am., Japan)
12 VDC, 1.25 Amp
(UK, Australia, N.Z., South Africa)
(The external power supply provided with this product
is UL listed by the power supplier’s manufacturer.)
Operating Temp:
0 to 50°C
(32 to 122°F )
standard-temp models: 105
-20°C to 65°C
(-4°F to 149°F )
extended-temp models:
105, 106, 07, 108
Storage Temperature:
-40 to 85°C
(-40 to 185°F)
Humidity:
5 to 95%, non condensing
Warranty
Lifetime
The information contained in this user’s guide is subject to change. For the most up-
to-date information on the S4TEF10xx-10x Device, see the user’s guide on-line at:
www.transition.com
then click on Product/Product Finder.
CAUTION: Visible and invisible laser radiation when open. Do not stare into beam
or view directly with optical instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
CAUTION: Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232,
RS422, RS485, DS1, DS3, Video Coax, etc., are intended to be connected to intra-
building
(inside plant)
link segments that are not subject to lightening transients or
power faults. Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB,
RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter-
building
(outside plant)
link segments that are subject to lightening transients or power
faults. Failure to observe this caution could result in damage to equipment.
Optional Accessories
The following items are available from Transition Networks
Part Number Description
SPS-1872-SA
Optional External Power Supply; 18-72VDC Stand-Alone
Output: 12.6VDC, 1.0 A
WMBL
Optional Wall Mount Bracket; 4.0 in.
(102 mm)
WMBV
Optional Vertical Mount Bracket; 5.0 in.
(127 mm)
WMBD
Optional DIN Rail Mount Bracket; 5.0 in.
(127 mm)
