Transition Networks PSM-8E, Руководство пользователя

Страница: 7 / 9

Connect PSM-8E to Terminal Devices
To connect cable from PSM-8E ports to terminal devices:
1. Locate or build 5250-compliant cables with male RJ-45 plug
connectors at both ends. (See page 14.)
2. Connect male RJ-45 plug connector at one end of cable to PSM-8E
RJ-45 jack connector.
3. Connect male RJ-45 plug connector at other end of cable to RJ-45
jack connector on network device.
4. Repeat steps 2-3 until all terminal devices are connected.
Power PSM-8E(s)
NOTE: When the PSM-8E is connected to an AC outlet supplying 90-
250VAC at 50-60 Hz, the PSM-8E automatically powers ON
To power ON the PSM-8E:
1. Locate power receptacle located on external power supply installed
at back of PSM-8E.
2. Plug unit (female) end of power cord into PSM-8E power receptacle.
3. Plug outlet (male) end of power cord into correct voltage AC wall
socket.
4. Verify that LED on top of external power supply is illuminated.
5. At PSM-8E front, verify that Power LED is illuminated.
DB-25 - At Back
At the back of the host PSM-8E, connect an AS/400 to the host
PSM-8E using a DB-25-to-DB-25 shielded twisted-pair cable.
SYSTEM 3X
At the front of the host PSM-8E, connect a System 3x to the host PSM-8E
using twisted-pair copper cable with male RJ-45 connectors installed at
both ends and appropriate baluns for the RJ-45 pin configuration.
REMOTE CONTROLLER
At the front of the host PSM-8E, connect a remote controller to the host
PSM-8E using two 4-port twinax “bricks”, twisted-pair copper cable with
male RJ-45 connectors installed at both ends, and appropriate baluns for
the RJ-45 pin configuration.
CONFIGURATION
SWITCHES
OPTICAL LINK
TX RX
POINT TO POINT
(2 MUXES)
DC POWER
INPUT W S C
OUTPUT PORTS
RING MODE
(3 OR MORE MUXES)
HOST SIDE
MULTIPLEXER
DEVICE SIDE
MULTIPLEXER
MODEL PSM-8
PINS 4/5 3/6 1/2
S/N xxxxxxxxx
System
3x
PowerStar Express Multiplexer
Link
Status
TX
RX
PSM-8E
2X 2X
0 1
GROUP A
2X 2X
2 3
GROUP B
2X 2X
4 5
GROUP C
2X 2X
6 7
GROUP D
Remote
Controller
PowerStar Express Multiplexer
Link
Status
TX
RX
PSM-8E
2X 2X
0 1
GROUP A
2X 2X
2 3
GROUP B
2X 2X
4 5
GROUP C
2X 2X
6 7
GROUP D
AS/400
PowerStar Express Multiplexer
Link
Status
TX
RX
PSM-8E
2X 2X
0 1
GROUP A
2X 2X
2 3
GROUP B
2X 2X
4 5
GROUP C
2X 2X
6 7
GROUP D
PowerStar Express Multiplexer
Link
Status
TX
RX
PSM-8E
2X 2X
0 1
GROUP A
2X 2X
2 3
GROUP B
2X 2X
4 5
GROUP C
2X 2X
6 7
GROUP D
1 2 3 4 5 6 0 1 2 3 4 5 6 0
Left Link Left Link
Parity Error Parity Error
Line Sync Line Sync
1 2 3 4 5 6 0 1 2 3 4 5 6 0
Left Link Left Link
Parity Error Parity Error
Line Sync Line Sync
1 2 3 4 5 6 0 1
2 3
4 5 6 0
Left Link Left Link
Parity Error Parity Error
Line Sync Line Sync
1 2 3 4 5 6 0 1 2 3 4 5 6 0
Left Link Left Link
Parity Error Parity Error
Line Sync Line Sync
Device PSM-8