13
CPSMC19xx-100 PointSystem™ Chassis
slide-in-modules
24-hour Technical Support:
1-800-260-1312
-- International:
00-1-952-941-7600
2.3
Optional LED Slide-in-Module
The optional LED slide-in-module (CPSLD-100) allows the network administrator to
determine at a glance which power supplies are installed and in use.
The LED module can be installed in any slot in the front of the chassis. The proce-
dure to install and replace it is the same as any other slide-in-module. (See sec-
tions 2.1.3
Installing the Media Converter Slide-in-Modules
and section 2.1.4
Replacing the Media Converter Slide-in-Modules
for more information.)
When the chassis is powered on, the installed LED slide-in-module goes through a
self-test where the four LEDs will light up in sequence. After the self-test, the LEDs
indicate the current power supply operating conditions.
Power
and
In Use
LED indicators are provided for
each installed power supply Modules (see the figure to
the right).
The numerical designation on the LED slide-in-mod-
ules is as follows:
1
Refers to the power supply installed in the
left
installation slot (when looking at the chassis from
the rear).
2
Refers to the power supply installed in the
right
installation slot (when looking at the chassis from
the rear).
See chapter 3
Powering the CPSMC19xx-100
for more information on the power
supply for the CPSMC19xx-100 chassis.
Power
In Use
1
Power
In Use
2
Panel Fastener
Screw
Содержание PointSystem CPSMC1900-100
Страница 40: ...40 CPSMC19xx 100 PointSystem Chassis...
