Transition Networks
N-FX-xx-03 NIC User Guide
Technical Specifications
Transition Networks’ Model N-FX-xx-03 supports 802.1P/Q VLAN tagging.
Expansion bus standard:
PCI 2.1, PCI 2.2 compliant
Data
rate:
100Mbps
fiber
media
LEDs (
on the bracket
):
•
LINK/ACT
• FDX (
full/half duplex
)
Wake-On LAN:
Supports magic packets only:
PCI 2.1 implemented via the 3-Pin WOL connector
PCI 2.2 implemented directly via PME# signal (
no Wake-
On LAN cable needed
)
OS Support:
Windows XP x32, Vista x32-64, Win7 x32-64, Win8 x32-64
Boot server support:
PXE (
default
)
PCB dimensions:
2.2”W x 4.8”D x 0.9”H (
55.9 mm x 121.9 mm x 23 mm
)
Shipping Weight:
1 lb (
455 g
) approximately
Power consumption:
2.5 Watts
MTBF:
greater
than
550,000
MIL-HDBK-217G
hours
greater
than
1,520,000
Bellcore
hours
Operating temp:
0°C to 50°C (
32°F to 122°F
)
Storage temp:
40°C to 85°C (
-40°C to 185°F
)
Humidity:
5% to 90%, non-condensing
Warranty:
Lifetime
WARNING: Visible and invisible laser radiation when open: DO NOT stare into the beam or view directly
with optical instruments. Failure to observe this warning could result in damage to your vision or
blindness.
CAUTION: Use of controls, adjustments, or the performance of procedures other than those specified
herein may result in hazardous radiation exposure.
The information in this manual is subject to change without further notice.
Drivers Supported
The set of drivers supported includes:
Windows Server 2008 / Windows Server 2008 R2 NIC Drivers,
Windows 2000 Server / Windows Server 2003,
Windows 2000 / Windows XP, Windows XP 64-bit,
Windows Vista, Windows 7, Windows 8, and
Solaris 10 Drivers.
See the
Contact Us
section under “My TN Access” on page
6
.
33498 Rev. B
http://www.transition.com/
Page 5 of 8
