Transition Networks Milan MIL-RCM16A-V2, Руководство пользователя

Страница: 16 / 52

11
Desktop Installation
Set the device on a sufficiently large flat space with a power outlet nearby. And,
the surface where user put the device should be clean, smooth, level, and
sturdy. Please make sure there is enough spacing around the device to allow
attaching of cables, power cord and air circulation.
Attaching Rubber Pads
1. Make sure mounting surface on the bottom of the device is grease and dust
free
2. Remove adhesive backing from Rubber Pads
3. Apply the Rubber Pads to each corner on the bottom of the device. (These
footpads can prevent the device from shock/vibration.)
Attaching Rubber Pads to each corner of the Device’s bottom
Rack Mounting
The 16 Slots intelligent converter chassis come with a rack-mounted kit and
can be mounted in an EIA standard size/19-inch Rack. Perform the following
steps for rack mounting the device:
1. Position one bracket to align with the holes on the side of the device and
secure it with the bracket screws. Then attach the remaining bracket to the
other side of the Device.