Transition Networks MIL-SEM24T4GPA, Руководство пользователя

Страница: 13 / 59

13
1. Make sure mounting surface on the bottom of the Switch is grease and dust
free.
2. Remove adhesive backing from your Rubber Feet.
3. Apply the Rubber Feet to each corner on the bottom of the Switch. These
footpads can prevent the Switch from shock/vibration.
Power On
Connect the power cord to the power socket on the rear panel of the Switch. The
other side of power cord connects to the power outlet. The internal power works
with AC in the voltage range 100-240VAC, frequency 50~60Hz. Check the power
indicator on the front panel to see if power is properly supplied.