Transition Networks
M/GE-ISW-SFP-01-PD User Guide
33668 Rev. A
http://www.transition.com/
Page 4 of 16
Installation
Electrostatic Discharge (ESD) Precautions
Always observe the following ESD precautions when installing or handing the M/GE-ISW-SFP-01-PD:
•
Do not remove the converter from its protective packaging until you are ready to install M/GE-ISW-
SFP-01-PD media converter.
•
Wear an ESD wrist grounding strap before handling the M/GE-ISW-SFP-01-PD media converter or
any of these component. If you do not have a wrist strap, maintain grounded contact with the unit
throughout any procedure requiring ESD protection.
Installation Options
You can install your media converter using the Industrial Velcro Mounting or the DIN Rail Clips as
described in the following sections.
Installing Industrial
Velcro
The Industrial Velcrostrip features a molded plastic hook and a heavy-duty, water-resistant adhesive for
superior holding power on smooth surfaces, including plastic. It is designed for indoor and outdoor use.
To install the Industrial Velcro onto the media converter:
1. Clean and dry surface before application.
2. Peel tape from fastener and press firmly into place.
3. Adhesive reaches maximum strength after 24 hours.
Note
: Recommended for temperatures between 0°F to 150°F. Not recommended for fabrics, dashboards,
flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener.
May not adhere well to certain types of brick; testing is recommended.
The VELCRO® Brand. © 2015 Velcro Industries B.V.
