Transition Networks
E-TBT-MC05 10Base-T Transceiver User Guide
33406 Rev. C
Page
5
of
14
UTP Cable (RJ-45 Connector)
The 10Base-T, RJ-45 out jack is used to connect a 10Base-T Ethernet device via a 2-pair UTP cable. (Use category
3, 4, or 5 UTP cable.) The length of the UTP cable can be up to 100m (328ft).
The RJ-45 connector pin configuration is shown in Figure 5. The pin assignments are show in the Table 2.
Figure 5: RJ-45 Connector Pin Configuration
Table 2: RJ-45 Pin Assignments
Pin
Out Jack Assignments
1
Outgoing Data 1 (+)
2
Outgoing Data 2 (-)
3
Incoming Data 1 (+)
4
Not connected
5
Not connected
6
Incoming Data 2 (-)
7
Not connected
8
Not connected
