LANMaster T8
16
3
8-Port Ethernet Hub w/SIC Slot
Connectors, Indicators and Switches
Connectors
Eight (8) RJ-45 10BaseT connectors are located on the front of the
LANMaster T8 Hub. One (1) power connector is located on the back
of the LANMaster T8 Hub.
NOTE: Slide-In cards (SICs) can provide optional additional fiber
optic, male and female AUI, BNC, and RJ-45 connectors
LEDs
The Power LED indicates the LANMaster T8 Hub connection to
external power. The Port Indicator Link/Partition LEDs indicate (for
each port) the status of the LANMaster T8 Hub connections to the
10 BaseT network.
MDI/MDI-X Switch
The MDI/MDI-X switch allows the RJ-45 connection at Port 8 to be
changed from straight-through to crossover.
5. MAINTENANCE
WARNING: DO NOT, UNDER ANY CIRCUMSTANCES,
open and attempt to repair the LANMaster T8 8-Port
Ethernet Hub w/SIC Slot or power supply adapter unit.
Failure to observe this warning could result in personal
injury or death from electrical shock.
NOTE: Failure to observe the above warning will immediately void
the warranty.
Technical Support Contact
For assistance in fault isolation and in maintaining the LANMaster
T8 8-Port Ethernet Hub w/SIC Slot Pocket Hub, contact:
Technical Support
(800) 260-1312
or your local distributor.
1
3
5
7
2
4
6
8
Power
INDICATORS
MDI SWITCH
CONNECTORS
