HDS-42AVR:
INSTALLATION MANUAL
5
HDS-42AVR – REMOTE CONTROL/OPERATION
Please Note:
The supplied remote is provided for programming use
only . It is not intended for normal operation of this device . The remote
is a general remote with extra IR commands designated for other
Transformative Engineering
products
1
POWER
– This button has no function . The HDS-42AVR should
remain ON at all times .
2
SOURCE SELECT
(Blue 1-4) Use to select the desired input .
3
AUDIO SELECT
(Yellow 1-4) – Only Yellow Buttons 1 & 2 are
Active . With your Audio/Video Receiver OFF, pressing “1” will allow
2-channel audio to pass to the TV over the HDMI plugged into
OUTPUT B . Pressing the “2” will mute the audio to the TV .
Additionally, turning OFF your Audio Video Receiver should automatically
transfer 2-CH Audio to your TV over the HDMI cable . Returning Power to
your Audio-Video Receiver should MUTE the TV’s sound .
1
2
3
HDS-42AVR-Manual.indd 5
12/20/17 12:10 PM