CONGLOMKB .COM
Please contact
cs@conglomkb .com
or
1-877-333-0098
for further assistance .
ENGLISH
9
Installation (continued)
MOUNTING THE UTILITY SINK
- Carefully place a bead of sealant all around
the top of the cabinet (A).
-
Ease the sink (B) onto the cabinet (A), and
ensure it is placed evenly and centered on
the cabinet (A). Wipe off any excess sealant.
Use masking tape to hold the sink (B) in
place until the sealant dries .
PLACEMENT
-
Push the cabinet (A) against the wall.
Position cabinet as desired . If required, level
it by adjusting the four leveling feet and
checking the alignment of the sink (B) using
a carpenter’s level .
B
A
Sealant
IMPORTANT: Secure the cabinet to the wall using hardware best suited for your wall type. Failing to
do so could result in property damage or personal injury.
Use silicone sealant to seal the sink to the wall and any adjacent surfaces to keep those surfaces dry.
Failing to do so could result in moisture damage.
DRAINAGE
-
The tailpipe (not supplied) previously installed to the drain can now be connected to your
household plumbing. In some cases, your household plumbing will have to be modified
to ensure proper drainage . If so, please consult a licensed plumber to complete
needed modifications.
SUPPLY LINES (NOT INCLUDED)
- Connect the supply lines to your home’s water
supply as per manufacturer’s instructions .
- Open the hot and cold water supply valves and
check to make sure they have been installed
to appropriate inlet ports . Check for leaks . Run
hot and cold water uninterrupted for about one
minute to remove any residue from the lines .
