7 CONGLOMKB .COM
Please contact
or
1-877-333-0098
for further assistance .
ENGLISH
Installation (continued)
INSTALLING THE FAUCET
1
2
3
4
5
6
7
12
13
14
15
16
18
9
11
8
17
20
19
432mm
(17 in .)
-
Unscrew the retaining ring (16) from the bottom of the body base
(11), ensuring that the gasket (14) and washer (15) are removed
with the retaining ring .
-
Place the lower part of the body base (11) through the hole in the
sink .
-
From underneath, slide the gasket (14), washer (15), and the
retaining ring (16) until in correct position .
-
Tighten the retaining ring (16) by hand, until it is snug .
-
Using a wrench or pliers, tighten the entire assembly .
-
Gently tighten the two screws (17) on the retaining ring . DO NOT
OVERTIGHTEN .
-
Attach the end of the hose with the small fitting (18) onto the
faucet outlet (20) and hand tighten . Then, using one wrench on
the hexagonal nut of the faucet outlet and another on the hose
nut, tighten the two ends together . Tightening with just a single
wrench may deform the nut on the hose .
-
Install the counterweight (19) on the hose about 432 mm (17 in .)
from the underside of the faucet . This can be adjusted based on
your own requirements .
-
Screw the sprayer head (1) onto the end of the hose (4) .
-
Attach the lever (13) to the handle base (12) .
NOTE:
Please ensure that the flexible risers included in the faucet are not kinked or
forced during installation.
