background image

2

TRAX 3™ is a computer controlled, self-diagnosing auxiliary fuel system that 

automatically transfers fuel from the auxiliary tank to the main tank. The 

TRAX 3™ system also monitors the vehicle’s fuel system status and the fuel 

levels of each tank. TRAX 3™ transfers fuel as needed with an electric fuel 

pump at a rate of one gallon every three minutes.
Fuel System Overview: 

Based on the individual vehicle fuel system calibration and size of the Transfer 

Flow auxiliary fuel tank, the TRAX 3™ system will transfer fuel at predetermined 

fuel levels while the vehicle is in use. The fuel level in the main tank and 

auxiliary tank will decrease at similar rates and the LCD will display the fuel 

level percentages in each tank and the operational status of the fuel system.
When the system is not transferring fuel and all is normal, the message, “SYS OK” 

will be displayed. When the fuel system is transferring fuel, the message, “PUMP 

ON” will be displayed on the right side of the LCD. If there is an issue with the 

fuel system, the LCD will display a Diagnostic Trouble Code (DTC). The TRAX 

3™ computer module does all the work independent of the LCD. If the LCD is 

disconnected, the computer module will still monitor and transfer fuel normally.

TRAX 3

 Fuel Management System

Liquid Crystal Display (LCD) Overview:

= Each black bar on the LCD display is equivalent to 10%.  As 

    fuel is consumed, the number of bars illuminated will decrease.

Содержание TRAX3












Отзывы: