OPERATING INSTRUCTIONS (cont)
Connecting the Power:
1. Connect the power cord into a properly grounded 110V
outlet with a minimum 15 amp rating.
2. Your Transfer Crafts® Heat Transfer Printing Machine requires
a full 15 amp grounded circuit for 110 volt operation
3. Extension cord use is NOT recommended. If extension cord
use is necessary, cords should be as short as possible and no
less than 12-guage. Heavy-duty extension cords are highly
recommended in this case.
WARNINGS AND PRECAUTIONS
Failure to Follow These Instructions:
1. May cause erratic controller functions.
2. May cause inaccurate displays and improper warm-up
3. May cause internal malfunctions which may permanently
damage the machine
Additional Warnings and Precautions:
• The Transfer Crafts® Heat Transfer Printing Machine contains
no user serviceable parts. Do not remove the panels or in any
way disassemble the machine.
• The Transfer Crafts® Heat Transfer Printing Machine will heat
up very quickly, never set any object on top of or near the
machine.
• Operating temperature can exceed 700°F, appropriate
caution should always be taken when working around
excessive heat.
• Do not operate near flammable materials.