Transense Clarity Series BG1200-G, Быстрое руководство по установке

Страница: 13 / 14

- 13 -
4.1 “Ring”
: After entering, user could see the following submenu.
a)
“Select ring”
: Choose from 20 different kinds of ringtones. On the message tone,
user could choose 3 kinds of ringtones.
b)
“Volume”
: Change the volume of the call ringtone and the message ringtone and the
speaker volume and the keypad tone.
4.2 “Alarm”
: There are 2 alarm tones
4.3 “Time and date”
: Set clock and date of the telephone.
4.4 “Select language”
: Choose the language of telephone using in English or in Chinese.
4.5 “Display set”:
After entering, user could see the following submenu.
a)
“Back light”
: Set brightness of back light and length of back light brightness.
b)
“Contrast”
: Press ▲ ▼ to modify.
4.6
“Security set”
: Start or close the function of checking PIN. When start the function,
user could modify PIN.
4.7
“
Reset
”: Resume the factory setting.
Call service
This function is about network settings.
Note:
The phone needs the support of the network operator.
5.1 “Select network ”
: User could choose
“Auto ”
mode or
“Manual ”
mode.
5.2 “Call diverts”
: open, close and interrogate all kinds of
“Call diverts”
including:
“Divert ALL Call”
,
“When busy”
,
“No answer”
,
“Not reachable”
,
“Cancel all”
.
5.3 “Call waiting”
: open, close and interrogate the
“Call waiting”
function.
5.4 “Call bar”
: open, close and interrogate all kinds of
“Call bar”
function, including:
“Bar All MO Call”
,
“Bar All MT Call”
,
“Bar MT Call ROAM”
,
“Bar MO Call
INTL”
,
“Bar MO Call EXHC”
.
5.5
“
Outgoing unshown
”: interrogate the “
Outgoing unshown
” additional function
5.6
“
Hotline
”: If the Hotline status is open, when the User takes the handset off the hook,
user does not need to press any key, and wait 2 - 9 Secs (selectable by user), then the
phone could make an automatic call (the number is selectable by user).
5.7 “Speed Dial”
: User could add and delete the
“Speed Dial”
number.
5.8 “Band Select”
: select the service Network band.
The usage of basic function
The function of the menu while talking
When talking, press menu , user could do some functions with shuttle, PB,message etc .
Shuttle: Switch lines. (Need the network operators service activated) .
PB: User could do the phone book operation.
Message : User could receive message, also send out or save message. And do message
setting and broadcast setting etc.
Mute operation: To open or close mute function in calling.