Transducer Techniques DPM-3, Руководство оператора

Страница: 15 / 53

- 15 -
MENU
KEY
DIGIT
SELECT KEY VALUE
SELECT KEY
FiLtr
Filtering
0 0000
Alarm filtering
0 Alarm unfiltered
1 Alarm filtered
0 0 000
Peak & Valley filtering
0 Peak & Valley unfiltered
1 Peak & Valley filtered
00 0 00
Display filtering
0 Display batch average every 16 readings
1 Display filtered signal
000 0 0
Adaptive filter threshold
0 Low adaptive filter threshold level
1 High adaptive filter threshold level
0000 0
Input signal filtering.
Can be applied to dis-
play, setpoint, analog
output, data output.
0 Autofilter
1 Batch average, 16 readings.
Moving averages with equivalent RC time
constants:
2 0.08 sec. 3 0.15 sec.
4 0.3 sec. 5 0.6 sec.
6 1.2 sec. 7 2.4 sec.
8 4.8 sec. 9 9.6 sec.
A Unfiltered
dEc.Pt
Decimal point
selection.
d
.
dddd
Determines decimal
point position & reading
resolution.
d
.
dddd dd
.
ddd ddd
.
dd dddd
.
d ddddd
.
.
ddddd Press ^ key to shift decimal point.
Decimal point is stored in TEDS memory.
Display shows
TEds instead of StorE .
Option board dependent menu items
ALSEt . ALS34 dEU1H dEU2H dEU1b dEU2b dEU3H DEU4H DEU3b DEU4b
Menu items related to alarm setup These will only appear if a relay board is detected. If
so, please see Section14.
AnSEt . An Lo . An Hi ..
Menu items related to analog output setup . These will only appear if an analog output
board is detected. If so, see Section 15.
tArE _
Tare & TEDS
selections.
0 0000 Calibration due
indicator.
0 Calibration due indicators enabled
1 Calibration due indicators disabled
0 0 000 Front panel
pushbutton Tare.
0 Front panel tare enabled
1 Front panel tare disabled
00 0 00
Auto-Tare.
0 Tare after meter reset
1 No tare after meter reset
000 0 0 TEDS Plug and
Play indicator.
0 TEDS Plug and Play indicator enabled
1 TEDS Plug and Play Indicator disabled
0000 0
TEDS Plug and Play.
0 TEDS Plug and Play enabled
1 TEDS Plug and Play disabled