STAND MASTER
BACK VIEW
Back View
Fig 2
6) Main Fuse F1A 250V
7) 4 x IEC Sockets
8) 4 x Fuse F5A 250v 6 x 30mm
9) ON/OFF Switch
10) AC Input
11) Built-in microphone
Functions
1) Programme Selector set to “
FLOOD
”
In this mode the sliders can be set to the desired output for each channel,
also the
“FLASH”
buttons will operate to take the channel to full output.
2) Function Selector set to “
AUDIO
”
In this mode the sliders still set the output level, and the internal chase pattern will be
triggered by the built-in microphone, you can adjust the sensitivity with the
“SPEED/SENSITIVITY”
control.
3) Function Selector set to “
AUTORUN
”
In this mode use the sliders as above to set the output, and the internal chase patterns
will operate, you can adjust the speed using the “
SPEED/SENSITIVITY
” control.
