www.prolight.co.uk
HS2 Hybrid Distribution Splitter
User Manual
5
DMX Controller
240V Mains input
Operating instructions
Setup:
Connect a DMX signal cable from a lighting console or fixture into the DMX Input via the 5-Pin male
connector on the side panel. The HS2 has 2 outputs each with a 5-pin XLR connector for each DMX
output. From each DMX output a signal cable may be connected with up to 32 fixtures per signal line,
and up to 100m cable length. Connect the HS2 to a suitable 240VAC 50Hz mains supply via the
PowerCON mains inlet.
LED indicators:
The HS2 is fitted with signal and DC indicators. Under normal conditions, with DMX signal passing
through the unit both LEDs will be illuminated. The DMX LED indicates the presence of a DMX signal.
The DC LED indicates the DMX drive circuit is functioning correctly.
Example connection diagrams:
POWER OUTPUT 1
DMX OUTPUT 2
DMX INPUT
POWER INPUT
DMX OUTPUT 1
POWER OUTPUT 2
