Transcension BOTE35, Руководство пользователя

Страница: 10 / 20

3.2.2 REVIEW SCENE OR CHASE
This instruction assumes that you have already recorded scenes and chases on the controller. Otherwise
skip this section and go to programming.
Action: (SCENE Review)
1) Select any one of the 23 banks by
pressing the BANK UP/DOWN buttons.
2) Select a SCENE button (1~8) to review.
3) Move faders to change fixture attributes.
Action: (CHASE Review)
1) Press any one of the 6
CHASE
buttons.
2) Press the TAP DISPLAY button to view
the step number on the display.
3) Press the BANK UP/DOWN buttons
review all scenes in the chase.
3.3 Programming
A program (bank) is a sequence of different scenes (or steps) that can be called up one after another. In the
controller 23 programs can be created of 8 scenes in each.
3.3.1 ENTERING PROGRAM MODE
Press the PROGRAM button until the LED blinks.
3.3.2 CREATE A SCENE:
A scene is a static lighting state. Scenes are stored in banks. There are 23 bank memories on the controller
and each bank can hold 8 scene memories. The controller can save up to a total of 184 scenes.
Action:
1) Press the PROGRAM button until
the LED blinks.
2) Position SPEED and FADE TIME sliders
all the way down.
3) Select the FIXTURES you wish to include
in your scene.
4) Adjust your lighting fixture to the scene
you require by moving the sliders.
5) Tap the ADD button.
6) Choose a BANK (01~23) to change
if necessary.
7) Select a SCENES button to store.
8) Repeat steps 3 through 7 as necessary.
8 scenes can be recorded in a Program.
9) To exit program mode, hold
the PROGRAM button.
Notes:
Make sure you are still in MANUAL Mode.
Notes:
Deselect Blackout if LED is on.
You can select more than one fixture.
There are 8 scenes in each bank.
All LEDs will flash to confirm. The LED display
will now indicate the Scene number and Bank
number used.
9