-
6 -
Power Supply
JetFlash
is powered by a built-in rechargeable lithium battery, which you can charge directly from
your computer via the USB port
.
When you use your
JetFlash
as a Digital Camera for the very first time, you’ll need to charge
the battery approximately two (2) hours before taking pictures. A fully charged battery will
last approximately five (5) hours with constant use.
Charging the Camera Battery
1. Verify
the
Camera Lens
is closed and the
Power LED
is off. (Power off)
2. Plug
your
JetFlash
into an available USB port. You will hear a beep.
3. Charging will start immediately. While charging, the
Power LED
will blink with a red light.
4. After
the battery is fully charged, the
Power LED
will stop blinking and turn off.
5. Unplug
your
JetFlash
to complete the battery charging.
Verify you have installed the Win98 drivers from the enclosed Driver CD before initial use in a
Windows 98SE computer. See the “
Driver Installation for Windows 98SE
” section for
reference.
Power On
Pull down (open) the
Power Switch (Lens Cover)
until the
Lens
is revealed.
You will hear a
beep and the
Power LED
will light up.
If
the
Power LED
is blinking red, the power is low and you need to
recharge your
JetFlash
.
Power Off
Pull up (close) the
Power Switch (Lens Cover)
until the
Lens
is covered. The
Power LED
light
will turn off.
