Transcend TS0MHUB4, Руководство пользователя

Страница: 4 / 7

2
System Requirements
Desktop or notebook computer with USB port and one of following operating
systems:
•
Windows
®
98/98SE, Windows
®
Me, Windows
®
2000, or Windows
®
XP
•
Mac™ OS 8.6 or later
Installation
Hardware Setup
1. Power on the computer where you will connect the 4-Port Hub and make
sure a USB port is available, enabled, and working properly.
2. Connect the Power Adapter cord to the power jack on the side of 4-Port
Hub . Then, plug Power Adapter cord into the adapter socket.
* Note: Please use the Power Adapter enclosed in the package. Use
of the wrong type of Power Adapter can result in serious
damage to the
4-Port Hub .
3. Plug the Series A (rectangular) plug of the USB cable into the USB port of
your computer.
* Note: If a cascading configuration is used, plug the Series A plug
into a downstream port of another 4-Port Hub .
4. Plug the Series mini-B (square) plug of the USB cable into the Series
mini-B port of the 4-Port Hub .
5. The 4-Port Hub is now ready for use. Just plug the Series A plug of your
USB device (USB Card Reader, USB Flash Drive, USB Printer, etc…) into
a Series A downstream port of the
4-Port Hub , the new connected device
will be automatically detected.
* Note: Above instructions provide general installation information,
which should be used in conjunction with the Owner’s
Manuals for your USB devices and computer system.