3
Driver Installation for Mac OS 9.x
1. Power on the computer to which you will connect the
Multi-Card Reader
and make sure
the USB port is enabled and working properly. (
Do not plug your
Multi-Card Reader
into
the USB port at this time
).
2. Insert the Driver CD into the CD-ROM drive and run the
Install
program under the
Mac
folder on the Driver CD.
3. Restart the computer to complete the installation process.
To Use the Multi-Card Reader
Secure Digital, miniSD (with adapter), MultiMediaCard, RS-MMC (with adapter), Memory
Stick, Memory Stick PRO, Memory Stick Duo (with adaptor) and Memory Stick PRO Duo (with
adaptor) use the same slot on the
Multi-Card Reader
. Only one type of media can be used in
this slot at a time.
To Use with Windows 98/98SE and 2000
1. Complete the driver installation.
2. Connect the
Multi-Card Reader
to an available USB port directly (or via the USB exten-
sion cable).
3. Your computer automatically recognizes the
Multi-Card Reader
and shows the “
New
Hardware Found
” message boxes. Windows installs the files needed to use your device.
