manualshive.com logo in svg

Transcend TS-ASP3, Руководство пользователя

Поделиться
Скачать
Transcend TS-ASP3 Скачать руководство пользователя страница 43

                                 

BIOS SETUP                      

   39

3.7  Power Management Setup

The Power Management Setup allows you to configure your system to minimize energy

consumption, according to your own style of computer use.

•     

ACPI Function

 This item allows you to enable/disable the Advanced Configuration and Power Interface

 (ACPI).

• 

• 

• 

• 

• 

ACPI Suspend Type

 Select the ACPI Suspend Type:  “S1 (POS)” or “S3 (STR)”.

 If your expansion cards do not support the STR function, you must leave this field on “S1

 (POS)” setting.  The STR (Suspend-to-RAM) is an energy-saving feature.  It takes only a few

seconds to wake up the system and return to the previous situation.

 NOTE:  This feature (STR) requires an ATX power supply with at least 720mA + 5V

 standby power for the Advanced Configuration and Power Interface (ACPI) functions.

 Otherwise, the system will fail to return from suspend mode.

•     

Power Management

 This category allows you to select the type (or degree) of power saving and is directly related

 to the following modes:

Содержание TS-ASP3






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды