Transcend TS-AKXA, Руководство пользователя

Страница: 45 / 57

•
Video Off Method
Defines the Video Off features
-Blank Screen: Only blanks the screen. Use this for monitors without power management
and “green” features.
-V/H SYNC+Blank: Blanks the screen and turns off vertical and horizontal scanning
-DPMS Support: The DPMS (Display Power Management System) feature allows the
BIOS to control the video display card if it supports the DPMS feature.
•
PM Control by APM
When “Yes”, an Advanced Power Management device will be activated to enhance the Max.
Power Saving mode and stop the CPU internal clock.
•
VIDEO Off Option
When “Enabled”, this function allows the VGA adapter to operate in a power saving mode.
-Always On: Monitor will remain on during power saving modes.
-Suspend Off: Monitor blanked when the system enters the supend mode.
-All Modes: Monitor blanked when the system enters any power saving mode.
•
MODEM Use IRQ
You can select one of the following interrupt resources for modem use: “N/A”, “3”, “4”, “5”,
“7”, “9”, ”10”, and “11”.
•
Soft-Off by PWRBTN
When set to “Instant-off”, the ATX switch can be used as a normal system Power Off button.
When set to “Delay 4 seconds”, you need to press the ATX switch down for more than 4
seconds if you want to Power Off the system.
•
State After Power Failure
State After Power Failure
-On : After a power failure, the system will automatically reboot as soon as power is
restored.
-Off : After a power failure, the system will not reboot when power is restored. The system
needs to be turned on again manually.
-Auto : After a power failure, the system will automatically reboot as soon power is restored
IF the PC was turned on when the power failed. If the PC was already turned off when the
power failed, the system needs to be turned on again manually.
BIOS SETUP
41