1. Suspend Mode
2. HDD Power Down
There are three selections for Power Management. Two of them have fixed mode settings.
1. Min. Power Saving :
Minimum power management mode. Inactivity period is defined below:
Suspend Mode = 1 hr.
HDD Power Down = 15 min.
2. Max. Power Saving :
Maximum power management mode. Inactivity period is defined below:
Suspend Mode = 1 min.
HDD Power Down = 1 min.
3. User Define :
Allows you to set each mode individually. Select the time-out period for each mode shown
above.
•
Video Off Method
Defines the Video Off features
-Blank Screen : Only blanks the screen. Use this for monitors without power management
and green features.
-V/H SYNC+BLANK : Blanks the screen and turns off vertical and horizontal scanning
-DPMS :The DPMS (Display Power Management System) feature allows the BIOS to
control the video display card if it supports the DPMS feature.
•
VIDEO Off In Suspend
This determines the manner in which the monitor is blanked. Select Yes to blank the monitor
when the system enters suspend mode.
•
Suspend Type
Select Suspend Type : Stop Grant or PWR ON Suspend.
•
MODEM Use IRQ
You can select one of the following interrupt resources for modem use: N/A, 3, 4, 5, 7,
9, 10, and 11.
42
BIOS SETUP
All manuals and user guides at all-guides.com
all-guides.com
