Transcend MP840, Руководство пользователя

Страница: 38 / 73

SETTI
NG
S
SETTI
NG
S
2.
Push the
“Menu Switch”
down (
Next
) or up (
Previous
) to switch between the 3
Record Quality
settings:
Low – Middle – High
. Press the
“Menu Switch”
inwards (
MENU
) to
select the
Record Quality
level and return to the
SETTINGS
Menu.
Sample rate Channels 2GB 4GB
Low (8KHz) 1 (stereo/mono) 64/128 hrs 128/256 hrs
Middle (16KHz) 1 (stereo/mono) 32/64 hrs 64/128 hrs
Record Sound
High (32KHz) 1 (stereo/mono) 16/32 hrs 32/64 hrs
If not enough memory space is available, or the battery power is too low, the
MP840
cannot support
the maximum recording capacity as outlined in the above table.
The closer you move the
MP840
’s Microphone to the source of the sound the higher the quality of the
recording.
RADIO Recordings are recorded in Stereo. MIC Recordings are recorded in Mono.
VAD (Voice Activation Detection)
VAD allows the
MP840
to make gapless audio recordings. This means the player will only begin recording
when it detects the subject is speaking, if the person(s) pauses, or stops speaking the
MP840
will stop
recording until the person(s) starts speaking again. This allows you to make complete and very easy to
listen to recordings.
1.
In the
SETTINGS
Menu, push the
“Menu Switch”
down (
Next
) or up (
Previous
) to
select the
VAD
item, then press the
“Menu Switch”
inwards (
MENU
) to enter the
VAD
Mode.