27
Troubleshooting
Q1:
Why doesn’t the driver CD Auto-Run after it is inserted into the CD-ROM drive in Windows?
A1:
This problem usually occurs because the
Auto-Insert
function of the CD-ROM drive is
disabled. Please enter the
Device Manager
in
Control Panel
and enable the
Auto-Insert
function of the CD-ROM drive. Alternatively, you can execute the
JetFlash.EXE
in the
driver CD manually.
Q2:
Why isn’t
my operating system detecting
JetFlash
after I’ve plugged it into the USB port of
my computer?
A2:
Please check following:
1. Is
JetFlash
properly connected to the USB port? If not, unplug it and plug it in again.
2. Is the USB port enabled? If not, refer the user’s manual of your computer (or
motherboard) to enable it.
3. Follow the procedures below to verify if the
Driver
is installed properly.
In Windows 98SE:
a. Right-click the
My Computer
icon on the desktop and the select
Properties
.
b. Select
Device Manager
tab and double-click
Network adapters
. Select the
WLAN miniUSB Adapter
and then select
Properties
.
