6
Charging the DrivePro Body 10
Before use, please ensure that the battery is fully charged. Charge the DrivePro Body 10 via the power supply
or USB cable. A solid orange LED light of the warning indicator is visible while charging. The LED light will turn
off when fully charged.
To charge the DrivePro Body 10, you can either:
1.
Connect the charging USB cable to a wall outlet with the included adapter.
2.
Connect the micro USB end to the bottom of the camera and the USB to a computer.
Inserting a microSD Memory Card
Insert a microSD memory card into the DrivePro Body 10 before use. Please use a Class 6 or above microSD
memory card with 8GB, 16GB or 32GB capacity.
1.
Insert a microSD memory card into the card slot on the bottom of the camera.
Note:
Always format new memory cards before using them for the first time.
WARNING:
1. The DrivePro Body 10 can only support FAT32 and exFAT file format, but not NTFS.
2. Please format the microSD memory card by DrivePro Body Toolbox. Otherwise, be sure to
set the Allocation Unit Size to 32 KB if you format the microSD card in other ways.
2.
To remove, push to eject the memory card out of the slot.
WARNING:
1. Do not remove the memory card during shutdown to avoid damages to the memory card
and loss of recorded videos
2. Transcend does NOT take any responsibility for data loss or damage during operation.
